PHOENIX CONTACT

เข้าสู่ระบบ | สมัครสมาชิก

2904985

Cast front adapter with attached, halogen-free round cable and a 50-pos. socket strip injection-molded on both sides for the connection of Yokogawa ProSafe controllers. Cable length: 1.0 m - 2904985

2900622

VARIOFACE front adapters, for Honeywell C300, series C I/O, max. 1 x 16 channels (37-pos. D-SUB connector) can be connected - 2900622

2702659

Axioline E, Digital output device, Digital outputs: , 24 V DC, connection method: 3-wire, Plastic housing, degree of protection: IP65/IP67 - 2702659

2904673

Power and fault signaling module with screw connection, only for use on the Termination Carrier, excluding corresponding DIN rail bus connector - 2904673

2900761

Assembled shielded round cable; connection 1: D-SUB socket strip (1x 37-position); connection 2: D-SUB socket strip (1x 37-position); cable length: 8 m - 2900761

2905201

Termination carrier for redundantly connecting 16 MACX Analog Ex i signal conditioners to analog output cards of the Yokogawa Centum VP controller, via two KS40 connectors, 40-pos. Suitable for Yokogawa card AAI543. - 2905201

2902932

Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection - 2902932

2907706

Two-channel input loop-powered 2-way isolator with increased cut-off voltage and plug-in connection technology for the electrical isolation of analog signals. Input signal = output signal: 0(4) mA ... 20 mA. Screw connection technology - 2907706

2904992

Cast front adapter with attached, halogen-free round cable and a 50-pos. socket strip injection-molded on both sides for the connection of Yokogawa ProSafe controllers. Cable length: 8.0 m - 2904992

2906217

Assembled shielded round cable; connection 1: Single wires (37-position) (The wires are marked and fitted with ferrules. The braided shield is routed to a separate cable end. ); connection 2: D-SUB socket strip (1x 37-position); cable length: 10 m - 2906217

2702446

Inline ECO, Safety module, Digital inputs: 4 (for 2 sensor circuits (1- or 2-channel, non-equivalent/equivalent)), for safety-related shutdown of the segment voltage by means of potential routing, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields - 2702446

2701559

Safety-related digital input module, degree of protection IP20, for use in PROFIsafe systems. The module has 4 safe digital inputs for two-channel assignment or 8 safe digital inputs for single-channel assignment. - 2701559

2904996

Cast front adapter with attached, halogen-free round cable and a 50-pos. socket strip injection-molded on both sides for the connection of Yokogawa ProSafe controllers. Cable length: 20.0 m - 2904996

2904684

Universal Termination Carrier for connecting 16 two-channel MACX Analog Ex i signal conditioners to digital or analog I/O cards, via two D-SUB connectors, 37-pos. (1:1 connection) - 2904684

2905678

Termination Carrier for redundantly connecting 16 MACX Analog Ex i solenoid drivers to digital output cards of the Yokogawa ProSafe RS controller, via two KS50 connectors, 50-pos. Suitable for Yokogawa SDV541 card. - 2905678

2904989

Cast front adapter with attached, halogen-free round cable and a 50-pos. socket strip injection-molded on both sides for the connection of Yokogawa ProSafe controllers. Cable length: 5.0 m - 2904989

1059740

Cable set for signal transmission on the Termination Carrier for coupling relays from the PSR-PC series. Suitable for PSR-PC51-1NO-1NC-24DC-SC (Order No. 2702522) and PSR-PC52-1NO-1NC-24DC-SC (Order No. 1017062). - 1059740

2986119

Configuration software for SafetyBridge technology and PSR-TRISAFE modules, connecting cable for PSR-TRISAFE - 2986119

2906003

Cable set for signal transmission and power supply on the Termination Carrier for PSR-PC50-1NO-1DO-24DC-SC (Order No. 2904664). Connection of terminal points A1 and A2 (signal transmission) as well as V+ (power supply) to the signal PCB. - 2906003

2905224

Cable set for signal transmission on the termination carrier for modules from the MINI Analog series. Connection of terminal points 5 and 6 of two adjacent MINI Analog modules to the signal PCB via a 4-pos. PTSM connector. - 2905224

2902656

Cable set for MACX MCR-PTB power and error message module (Order No. 2865625), for use on the termination carrier for signal conditioners from the MACX MCR(-EX)-SL-... series. - 2902656

2905846

Dummy module with no function for connecting unused intrinsically safe signal cables, with plug-in push-in connection terminal blocks. - 2905846

2924993

Plug for cold junction compensation for thermocouples, for safe switching of limit values, in combination with MACX ...-T-UI... temperature transducers. - 2924993

2904674

Cable set for signal transmission on the Termination Carrier for two-channel modules or modules with double output from the MACX Analog Ex series. Connection of terminal points 3.1 and 3.2 as well as 2.1 and 2.2 (signal transmission) to the signal PCB. - 2904674